| POWERPOINT |
| SEA WATER / MARINE PUMPS |
Corro-Coat EP-F 5002
| Product Description: |
Corro-Coat
EP-F 5002 is a Fusion Bond Epoxy coating designed for valves and fittings protection. It is typically applied up to 500gm. thickness. Corro-Coat EP-F 5002 is normally applied in the temperature range of 190°C to 240°C (374°F to 464°F). |
| Operating Conditions: |
Corro-Coat EP-F 5002
is designed for non potable water and chemical systems. It is available in a range of colors enabling custom color valves coating. |
| Storage Conditions: |
A shelf Life of at least
12 months is obtained when stored at maximum 25°C (77°F) with
relative humidity of 65%. Do not exceed 33°C (91°F). |
Typical Powder Properties
| Description |
Norm |
Result |
| Gel time |
ISO 8130.6@ 200.C (392°F) |
25 - 65 seconds |
| Gel time |
ISO 8130.6@ 240°C
(464°F) |
5 - 35 seconds |
| Moisture content |
CSA-Z245.20-02 (12.4B) |
Below 0.50% (at time of manufacture) |
| Time to cure |
@240°C (464°F) |
50-150 seconds |
| Time to cure |
@220°C (428°F) |
150-250 seconds |
| Time to cure |
@200°C (392°F) |
250-350 seconds |
| Gloss |
@ 60 degrees |
70 - 90 |
| Hardness |
Buchholz DIN 53153/ISO
2815 |
80 |
| Abrasion resistance |
ASTM D 1944, 1000g load, 3000 cycles, CS17 wheels | Less than 0.200g weight loss |
| Water immersion |
ASTM D-870. distilled
water |
3000 hours. no blistering
or loss of
adhesion |
Chemical Resistance
| Acetic acid 10% | Excellent | Nitric acid 10% | limited resistance |
| Acetic acid concentrated |
little/no resistance | Nitric acid 3% |
limited resistance |
| Acetone |
Limited resistance |
Nitric acid 30% | limited resistance |
| Ammonia 10% |
Limited resistance | Petroleum | Excellent |
| Ammonia concentrated |
Limited resistance | Phenol | little/no resistance |
| Butanel |
Excellent |
Phosphoric acid 10% | Excellent |
| Chemicals |
Resistance | Phosphoric acid 4% | Excellent |
| Citric acid 10% |
Limited resistance | Phosphoric acid 43% | Excellent |
| Crude oil |
Excellent | Seawater | Excellent |
| Cyclohexanone |
little/no resistance | Sodium bi chromate | Excellent |
| Distilled water |
Excellent | Sodium carbonate 10% | Excellent |
| Edible oil |
Excellent | Sodium chloride 2% | Excellent |
| Ethyl acetate | Limited resistance | Sodium chloride 20% | Excellent |
| Ethyl alcohol 96% |
Excellent | Sodium hydroxide 30% | Excellent |
| Glycerol | Excellent | Sodium hydroxide 5% | Excellent |
| Hydrochloric acid 10% |
Limited resistance | Salphuric acid 20% | Excellent |
| Hydrogen peroxide |
Limited resistance | Tap water | Excellent |
| Isopropyl alcohol |
Excellent | Toluene | Excellent |
| Lactic acid 10% |
Excellent | Turpentine | Excellent |
| Methyl-ethyl ketone |
Limited resistance | Urea | Excellent |
| Na-hypochlorite. dilute |
Limited resistance | Xylene | Excellent |
Note: The information on this Product Data Sheet is given to the best of the manufacturer's knowledge based on laboratory testing and practical experience. However, as the product is often used under conditions beyond the manufacturer's control, only the quality of the product itself can be guaranteed. Powerpoint Pumps reserves the right without notice to alter or change the content of the Product Data Sheet.
Powerpoint Pumps, Issued November 2006.
THIS PRODUCT DATA SHEET SUPERSEDES ALL PREVIOUSLY ISSUED VERSIONS.
